hybrid's V4 500 Project



Home | Diary | Chassis | Bodywork | Engine | Parts List | Acknowledgements

Project 500 Chassis



Overview

Update 21/08/05: Change of plans. The TZR chassis is not the right thing to be using here.


At first glance, the TZR chassis appears to be about 30mm narrower than the RZ500 frame.
Without measuring, it appeared that there was about 30mm clearance each side of the engine from the RZ500 frame.
However, once the engine is offered up to the frame, there is not enough room for it.
For this reason, I have decided to "bite the bullet" and use a Micoproducts frame, which is custom built for the job.

Here is the current status of the chassis. Some pics are clickable for larger versions.


Component Source Picture
Frame Update: Custom Made Micoproducts
Forks USD TZR 3XV 250SP
- Anodised Gold
- Fully Reconditioned
- Sprung/Valved to suit new weight
Swingarm TZR 3XV No pic yet :)
Wheels Update: Marvic FZR + Brembo 320mm Rotors
Discs Front: Brembo 320mm Rotors
Rear: Custom Aussie Discs


Home | Diary | Chassis | Bodywork | Engine | Parts List | Acknowledgements